The 12/24 Volt „Just Water“ model, comes complete with all the necessary to let you mount your own watermaker aboard. You have only to connect the hoses and the electric wires to get the job done!
No specials skills or wrenches are required to perform this job.
This series was developed for „Conscious Sailors“ who need to produce water reliably, cheaply and without any frills. This is the simplest to use watermaker, without fancy electronics or expensive spare parts. Just Water are just watermakers that work perfectly without any problems.
This strong unit is built to last and comes with 1x 2540 (60l/h), 2x 2521 (60l/h), 3x 2521 (80l/h) high rejection and high productivity CSM Toray membranes. A new vessel rack made in composite, strong and very lightweight is supplied as standard.
A heavy duty self priming feed pump is included as standard equipment, and it allows the watermaker to be positioned above the seawater level as well.
The „Just Water“ reverse osmosis watermaker features an AISI 316 pressure regulator and an AISI 316 glycerine damped pressure gauge at the end of the pressure vessel, eliminating the use of a flow panel.
This solution makes the installation not only cheaper, but also very reliable and much easier to fit into the boat.
Model with BRASS PUMP HEAD (-B).
|Model||l/h. ( l/day)||Membranes||V-A||Notes|
|JW-60-2540-12||60 l/h. (1320 l/day)||1 Membrane 2540||12V-50A||Length of the Vessels = 115 cm|
|JW-60-2540-24||60 l/h. (1320 l/day)||1 Membrane 2540||24V-36A||Length of the Vessels = 115 cm|
|JW-60-2521-12||60 l/h. (1440 l/day)||2 Membranes 2521||12V-50A||Length of the Vessels = 70 cm|
|JW-60-2521-24||60 l/h. (1440 l/day)||2 Membranes 2521||24V-36A||Length of the Vessels = 70 cm|
|JW-80-2521-12||80 l/h. (1920 l/day)||3 Membranes 2521||12V-50A||Length of the Vessels = 70 cm|
|JW-80-2521-24||80 l/h. (1920 l/day)||3 Membranes 2521||24V-36A||Length of the Vessels = 70 cm|
|♦||12V or 24V Electric Motor made for continuous duty at 40˚C ambient temperature.|
|♦||High pressure triplex pump with ceramic plunger with brass head.|
|♦||Single pre filtration unit (housing for 5 micron 10″ filters). with low pressure gauge and activated carbon filter to remove the chlorine from the flushing water.|
|♦||NEW!! Vessel rack made in composite, very strong, elegant and lightweight.|
|♦||CSM Toray 21″ or 40″ seawater reverse osmosis membrane.|
|♦||Pressure control needle valve and glycerine damped pressure gauge in AISI 316.|
|♦||Fresh water flow meter.|
|♦||Control box for the pumps.|
|♦||Valves system for flushing of the device.|
|♦||Custom cut high pressure hose from HP pump to the membrane vessel.|
|♦||All the needed fittings.|